With the approaching of summer, high temperature weather poses a severe challenge to the lodering water tank system of all kinds of mechanical equipment. As the core component of the equipment cooling system, the running state of the lodering water tank directly affects the overall performance and life of the equipment. To this end, we have compiled a series of strategies for efficient maintenance of lodering water tanks, aiming to help the majority of users to better protect the lodering water tank, prevent the adverse effects of high temperature, and ensure that the equipment can still work stably in high temperature seasons.

1. Fine cleaning of heat sink to ensure heat dissipation efficiency

In the face of high temperature environment, the heat sink outside the lodering water tank is easy to accumulate dust or plug, which affects the heat dissipation effect. Therefore, it is essential to clean the heat sink regularly. It is recommended to use water flow with moderate pressure for washing, and pay attention to control the water pressure to avoid damage to the heat sink structure. When cleaning, it should be ensured that the front and back of the heat sink are thoroughly cleaned around, in order to improve the heat dissipation efficiency and reduce the temperature of the lodering water tank.

2. scientific water change and filling antifreeze, prolong the life of the lodering water tank

In order to completely remove the impurities and scale accumulated inside the tank, it is recommended to use the cyclic water change method. Firstly, the loader is started for about 5 minutes, and when the water temperature rises to about 30 degrees, it is turned off and the water in the tank is discharged. Repeat this process several times until the discharged water becomes clear. It is worth noting that after cleaning, do not directly add water to the tank, but should be filled with high quality antifreeze. Antifreeze can not only effectively prevent the tank from freezing in winter, but also inhibit scale generation and improve cooling effect in summer, so as to extend the service life of the lodering water tank and the entire cooling system.

3. safe operation, to prevent the risk of scald

It is strictly forbidden to open the lodering water tank cover after the loader is normally used and stopped. Due to the accumulation of a large number of high temperature steam in the lodering water tank, rashly opening the lodering water tank cover is easy to cause burns. Therefore, the operator must strictly follow the safety protocol to ensure that any maintenance operation is performed after the equipment has been completely cooled.

4. adhere to the use of antifreeze, prevent scale blockage

Stress that the tank must be filled with antifreeze rather than ordinary water. Ordinary water is easy to evaporate and easy to produce scale at high temperature, which will block the water pipe and lodering water tank pipeline, affect the circulation of coolant, and then lead to high temperature failure. The antifreeze can effectively prevent such problems, ensure the smooth operation of the cooling system, and provide continuous and stable cooling protection for the equipment.

In summary, through fine cleaning of heat sinks, scientific water change and filling of antifreeze, safe operation and persistent use of antifreeze and other measures, we can effectively deal with the challenge of summer high temperature on the lodering water tank and equipment, and ensure that the equipment can still be efficient and stable operation in the high temperature season. I hope that the majority of users can pay attention to the daily maintenance of the lodering water tank, and lay a solid foundation for the long-term healthy operation of the equipment.